Rapid fire instructions, rapid fire help, rapidfire, rapid fire, rapid fire mod, how to, single rapid fire, dual rapid fire, 8-mode stealth, instructions, sync
Instructions:
Here are two different kinds of Rapid Fire modz: Button and Stealth.
Button Mod:
A Rapid Fire button mod is small tactile button that is installed directly where your middle finger rests on the back of your controller. When pushed, this button delivers incredibly cast about of signals to your left or right trigger. The reason one would want a rapidfire button mod is because you have the ability to push the button any time you want for instant rapid fire. And once the button is released, rapid fire stops. You could quickly switch between rapid fire and single shot (using your FAL on MW2 or Snub Pistol in Gears of War).
The difference between Single Rapid Fire and Dual Rapid Fire.
Single Rapid fire is for when you have a single weapon in your hands in most First Person Shooters (EG: Modern Warfare 2 FAL, M21 and most hand guns. the Snub pistol in Gears. TheAK47 in GTA etc...)
Dual rapid fire is for when you have two weapons in both hands in a specific game (EG: Modern Warfare 2 Akimbo, Halo Dual Wielding, Left for Dead 2). The cool thing about this mod, is that it can be used as Single Rapid Fire as well. just don't use the left button. super simple! this is the most simple and cost efficient mod on the market.
Stealth Mod:
It is incredibly simple to use your Stealth mod. Once in your game, press your sync button, notice that the player 3 light will light up. This indicates that the Stealth mod is on and working. Press again and the player 3 LED will blink twice. This is mode 2. Press again for mode 3 (3 blinks) and so on. Stealth mod means that there are NO buttons installed into your controller. All the installation is done INSIDE the controller so no one knows that you have a mod. When the Stealth Mod is on, your Rapid Fire will actually be IN your left or right trigger depending on what mode you're in.
Once you receive your controller, put a pair of either Duracell or Energizer batteries into the battery pack.
Turn your controller on by pressing the Xbox Guide button located in-between the Start and Back buttons. once you controller is on, you will notice a circle of light blinking, this is indicating that your controller is on. for the next step, you'll need to locate the Sync or Connect button on your controller located on the TOP of the controller in-between the LB and RB. Press that for 3-5 seconds and you'll notice that that blinking circle of light is now spinning around. You'll need to find the same button located on you Xbox and press that quickly. In a second or two they'll find each other and both will flash at the same time, and it's synched up. You'll know this because your controller will have just one of the circle of lights lit. Now you've successfully synched your ProModz controller!
Single rapid fire and Dual rapid fire are BOTH ready to use. No modes to cycle through. just push the button to use rapid fire.
6-Mode Stealth (Undetectable)
Once your controller is connected, all you need to do is tap the sync button to cycle through the modes.
•Mode 1 (1 Blink)= Halo 3/Modern Warfare 2 Akimbo/ -dual trigger
•Mode 2 ( 2 Blinks)= Cod 4
•Mode 3 (3 Blinks)= Cod 5 slow
•Mode4 (4 Blinks) = COD5 FAST/Modern Warfare 2
•Mode 5 (5 Blinks) = 2 Shot Burst (Modern Warfare 2)
•Mode 6 (6 Blinks) = 5 Shot Burst (Modern Warfare 2)
•0 Blinks = OFF
8-Mode Stealth (Undetectable)
Once your controller is connected, all you need to do is tap the sync button to cycle through the modes.
•Mode 1 (1 Blink)= Modern Warfare 2 RT Trigger
•Mode 2 ( 2 Blinks)= Modern Warfare 2 Akimbo
•Mode 3 (3 Blinks)= Cod 4 FAST
•Mode4 (4 Blinks) = UNIVERSAL CALL OF DUTY
•Mode 5 (5 Blinks) = COD5 FAST
•Mode 6 (6 Blinks) = Gears Of War 1/2
•Mode 7 (7 Blinks) = Halo 3 -dual trigger
•Mode 8 (8 Blinks) = 2 Shot Burst
•0 Blinks OFF
If you have any other questions on our controllers, and how to use them. Please feel free to email us at
Questions@ProModz.com
Thanks!
Here are two different kinds of Rapid Fire modz: Button and Stealth.
Button Mod:
A Rapid Fire button mod is small tactile button that is installed directly where your middle finger rests on the back of your controller. When pushed, this button delivers incredibly cast about of signals to your left or right trigger. The reason one would want a rapidfire button mod is because you have the ability to push the button any time you want for instant rapid fire. And once the button is released, rapid fire stops. You could quickly switch between rapid fire and single shot (using your FAL on MW2 or Snub Pistol in Gears of War).
The difference between Single Rapid Fire and Dual Rapid Fire.
Single Rapid fire is for when you have a single weapon in your hands in most First Person Shooters (EG: Modern Warfare 2 FAL, M21 and most hand guns. the Snub pistol in Gears. TheAK47 in GTA etc...)
Dual rapid fire is for when you have two weapons in both hands in a specific game (EG: Modern Warfare 2 Akimbo, Halo Dual Wielding, Left for Dead 2). The cool thing about this mod, is that it can be used as Single Rapid Fire as well. just don't use the left button. super simple! this is the most simple and cost efficient mod on the market.
Stealth Mod:
It is incredibly simple to use your Stealth mod. Once in your game, press your sync button, notice that the player 3 light will light up. This indicates that the Stealth mod is on and working. Press again and the player 3 LED will blink twice. This is mode 2. Press again for mode 3 (3 blinks) and so on. Stealth mod means that there are NO buttons installed into your controller. All the installation is done INSIDE the controller so no one knows that you have a mod. When the Stealth Mod is on, your Rapid Fire will actually be IN your left or right trigger depending on what mode you're in.
Once you receive your controller, put a pair of either Duracell or Energizer batteries into the battery pack.
Turn your controller on by pressing the Xbox Guide button located in-between the Start and Back buttons. once you controller is on, you will notice a circle of light blinking, this is indicating that your controller is on. for the next step, you'll need to locate the Sync or Connect button on your controller located on the TOP of the controller in-between the LB and RB. Press that for 3-5 seconds and you'll notice that that blinking circle of light is now spinning around. You'll need to find the same button located on you Xbox and press that quickly. In a second or two they'll find each other and both will flash at the same time, and it's synched up. You'll know this because your controller will have just one of the circle of lights lit. Now you've successfully synched your ProModz controller!
Single rapid fire and Dual rapid fire are BOTH ready to use. No modes to cycle through. just push the button to use rapid fire.
6-Mode Stealth (Undetectable)
Once your controller is connected, all you need to do is tap the sync button to cycle through the modes.
•Mode 1 (1 Blink)= Halo 3/Modern Warfare 2 Akimbo/ -dual trigger
•Mode 2 ( 2 Blinks)= Cod 4
•Mode 3 (3 Blinks)= Cod 5 slow
•Mode4 (4 Blinks) = COD5 FAST/Modern Warfare 2
•Mode 5 (5 Blinks) = 2 Shot Burst (Modern Warfare 2)
•Mode 6 (6 Blinks) = 5 Shot Burst (Modern Warfare 2)
•0 Blinks = OFF
8-Mode Stealth (Undetectable)
Once your controller is connected, all you need to do is tap the sync button to cycle through the modes.
•Mode 1 (1 Blink)= Modern Warfare 2 RT Trigger
•Mode 2 ( 2 Blinks)= Modern Warfare 2 Akimbo
•Mode 3 (3 Blinks)= Cod 4 FAST
•Mode4 (4 Blinks) = UNIVERSAL CALL OF DUTY
•Mode 5 (5 Blinks) = COD5 FAST
•Mode 6 (6 Blinks) = Gears Of War 1/2
•Mode 7 (7 Blinks) = Halo 3 -dual trigger
•Mode 8 (8 Blinks) = 2 Shot Burst
•0 Blinks OFF
If you have any other questions on our controllers, and how to use them. Please feel free to email us at
Questions@ProModz.com
Thanks!
